Welcome to the NavList Message Boards.

NavList:

A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Message:αβγ
Message:abc
Add Images & Files
    or...
       
    Reply
    Re: sextant for use on land
    From: James R. Van Zandt
    Date: 2006 Sep 9, 22:50 -0500


    Geoffrey Kolbe <g.kolbe@btconnect.com> wrote:
    >   The bubble is repairable. You will need to obtain a small bottle of
    >   pure xylene and a (preferably glass) syringe with which to insert the
    >   xylene into the  bubble chamber. You will also need to fashion a
    >   screw driver to undo the small "Bristol" screw on the chamber. A
    >   small Phillips screw driver is the usual starting point for this
    >   exercise. There is a steel ball under the Bristol screw, so when you
    >   get the screw out, don't loose that ball! A bubble exactly 5mm in
    >   diameter in the bubble chamber is equivalent to one degree diameter
    >   in the optical system. This is twice the diameter of the sun, so is
    >   good for that, and is good for star sights as well.

    Thanks!  My set screw had some sort of clear coating (lacquer?) which
    came off with lacquer thinner.  That let me see clearly enough to
    identify it as a .069 inch Bristol screw with four splines.  A 1.8 mm
    standard screwdriver actually fits pretty well, but didn't break it
    loose with the amount of torque I wanted to apply.  Presumably there
    is lacquer on the threads. So I'll look for the right wrench - I
    haven't found a local source for that yet.

    I have also determined that I can buy xylene at Home Depot - but only
    in a one gallon can.  Since I only need about a tablespoon, I will
    look a bit further - maybe at a hobby shop.

    BTW I assume they picked xylene for the low melting point and low
    viscosity (both lower than water, according to
    http://www.engineersedge.com/fluid_flow/fluid_data.htm).  However I
    see from the Wikipedia article that xylene has three isomers, and that
    one of them melts at 13 C.  I suppose Link was careful about which
    isomer they used.  I doubt that Home Depot cares, but maybe there's
    something on the label.

    I'm also wondering if rubbing alcohol wouldn't be about as good for my
    purposes :-)

    I do have a syringe, but it's plastic.  I'll just have to hope it
    doesn't dissolve in xylene.  Thinking ahead, it seems easiest to me to
    fill the chamber completely, then inject an air bubble of the right
    size, drop in the steel ball, insert the set screw, and finally coat
    with clear nail polish.

                    - Jim Van Zandt




    --~--~---------~--~----~------------~-------~--~----~
    To post to this group, send email to NavList@fer3.com
    To unsubscribe, send email to NavList-unsubscribe@fer3.com
    -~----------~----~----~----~------~----~------~--~---

       
    Reply
    Browse Files

    Drop Files

    NavList

    What is NavList?

    Join NavList

    Name:
    (please, no nicknames or handles)
    Email:
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.
    Email:

    Email Settings

    Posting Code:

    Custom Index

    Subject:
    Author:
    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site