NavList:
A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding
Re: Two mirror a.h.
From: Randall Morrow
Date: 2011 Oct 27, 07:16 -0700
Yes, I did reverse the digital level end for end and 'split the difference', turning back only 1/8 of a screw turn to correct. I did the same for both axes. A 1/4 turn is normally needed for the device to step from 0.1 to 0.0 or back. Thanks for the advice, it seems to work.
Thanks to all who looked at the plotting. I realize now I do not know how to do this properly and am encouraged that the observations were not as far off as I thought. Is there an article in the Nav-list archives I can refer to, to learn better plotting and to draw my own plotting sheets?
Randy
Randall F Morrow PT
Ergonomics Safety Consultant
Chronic Pain Program
Kaiser Permanente - Kern County - Bakersfield
NOTICE TO RECIPIENT: If you are not the intended recipient of this e-mail, you are prohibited from sharing, copying, or otherwise using or disclosing its contents. If you have received this e-mail in error, please notify the sender immediately by reply e-mail and permanently delete this e-mail and any attachments without reading, forwarding or saving them. Thank you.
From: Randall Morrow
Date: 2011 Oct 27, 07:16 -0700
Yes, I did reverse the digital level end for end and 'split the difference', turning back only 1/8 of a screw turn to correct. I did the same for both axes. A 1/4 turn is normally needed for the device to step from 0.1 to 0.0 or back. Thanks for the advice, it seems to work.
Thanks to all who looked at the plotting. I realize now I do not know how to do this properly and am encouraged that the observations were not as far off as I thought. Is there an article in the Nav-list archives I can refer to, to learn better plotting and to draw my own plotting sheets?
Randy
Randall F Morrow PT
Ergonomics Safety Consultant
Chronic Pain Program
Kaiser Permanente - Kern County - Bakersfield
NOTICE TO RECIPIENT: If you are not the intended recipient of this e-mail, you are prohibited from sharing, copying, or otherwise using or disclosing its contents. If you have received this e-mail in error, please notify the sender immediately by reply e-mail and permanently delete this e-mail and any attachments without reading, forwarding or saving them. Thank you.
Gary LaPook <garylapook@pacbell.net>
Sent by: navlist-bounce@fer3.com 10/26/2011 11:04 PM
|
|
Did you end up using the "end for end" method
to improve the accuracy of your evel? gl --- On Wed, 10/26/11, Randall.F.Morrow@kp.org <Randall.F.Morrow@kp.org> wrote: From: Randall.F.Morrow@kp.org <Randall.F.Morrow@kp.org> Subject: [NavList] Re: Two mirror a.h. To: NavList@fer3.com Date: Wednesday, October 26, 2011, 2:52 PM Actually what looks like a disc rotor is just a circular piece of scrap aluminum that a friend of mine spun down flat on his lathe. Randall F Morrow PT Ergonomics Safety Consultant Chronic Pain Program Kaiser Permanente - Kern County - Bakersfield NOTICE TO RECIPIENT: If you are not the intended recipient of this e-mail, you are prohibited from sharing, copying, or otherwise using or disclosing its contents. If you have received this e-mail in error, please notify the sender immediately by reply e-mail and permanently delete this e-mail and any attachments without reading, forwarding or saving them. Thank you. |