Welcome to the NavList Message Boards.

NavList:

A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Message:αβγ
Message:abc
Add Images & Files
    or...
       
    Reply
    Re: Trombone Kamal Prototype
    From: Greg Rudzinski
    Date: 2009 Jun 3, 21:57 -0700

    I was able to test the Trombone Kamal prototype at the beach today and
    found that observing the sun through scotch tape and plex wasn't going
    to work and that an additional reference mark was needed at 3 inches.
    The clear scotch tape was removed and the reference marks were grooved
    in with a straight edge and razor blade then blackened with a felt tip
    pen. Three observations were successfully performed before sunset
    yielding  intercepts inside of 10 miles vs. GPS but more testing will
    need to be done to confirm accuracy. The concept is showing promise.
    
    On Jun 3, 10:52�am, Greg Rudzinski  wrote:
    > --- On Wed, 6/3/09, Greg Rudzinski  wrote:
    >
    > > From: Greg Rudzinski 
    > > Subject: TROMBONE KAMAL PROTOTYPE
    > > To: gregrudzin...---.com
    > > Date: Wednesday, June 3, 2009, 10:46 AM
    > > The Trombone Kamal gives the 9th
    > > century Kamal a 20th century facelift.
    >
    > > How to make your own.
    >
    > > Materials:
    > > - 3.5 x 5" x 1/8" white plex which is transparent enough to
    > > see a faint image of the sun through it at low altitudes.
    >
    > > - Standard metal tape measure.
    > > - Electrician tape (black).
    > > - Scotch tape (clear).
    > > - Black felt tipped pen.
    >
    > > 1. Lay a strip of electricians tape along the 3.5" base of
    > > plex. This will be the horizon reference line.
    >
    > > 2. Using a black felt tipped pen precisely draw in lines
    > > spaced 1", 2", and 4" above the electrician tape horizon
    > > reference.
    >
    > > 3. Place clear scotch tape over black lines to fix and
    > > protect from smudging.
    >
    > > How to use.
    >
    > > � ���Place the metal tape measure end
    > > centered just below the horizon reference. Hold in place
    > > with index finger and thumb then trombone the tape measure
    > > out until pressed below the eye. Adjust the tape measure in
    > > or out until the sun and horizon are bracketed by reference
    > > lines. The hs altitude will be the inverse tangent of 1", 2"
    > > or 4" over the tape measure reading. A K&E 4080-3 10"
    > > slide rule works well for this calculation.
    > > � ���Relative bearings, doubling the
    > > angle on the bow, and distance off by vertical angle are
    > > piloting applications that can also be performed by the
    > > Trombone Kamal.
    >
    > > � � �
    >
    > �IMG_4414.JPG
    > 629KViewDownload
    >
    > �IMG_4415.JPG
    > 980KViewDownload
    --~--~---------~--~----~------------~-------~--~----~
    Navigation List archive: www.fer3.com/arc
    To post, email NavList@fer3.com
    To unsubscribe, email NavList-unsubscribe@fer3.com
    -~----------~----~----~----~------~----~------~--~---
    
    

       
    Reply
    Browse Files

    Drop Files

    NavList

    What is NavList?

    Join NavList

    Name:
    (please, no nicknames or handles)
    Email:
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.
    Email:

    Email Settings

    Posting Code:

    Custom Index

    Subject:
    Author:
    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site