Welcome to the NavList Message Boards.


A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Add Images & Files
    Re: Quartz Watch Movement Replacement
    From: Bill B
    Date: 2012 Jul 22, 17:15 -0400

    On 6/18/2012 9:20 PM, Greg Rudzinski wrote:
    > As for your RCC testing I would try transmitting a VHF handheld radio at
    > 5 watts right next to the RCC to see what happens. I will try this also.
    > Ham radio transmitters may have influence also. Even gas engine sparking
    > can disrupt or alter radio signals. Lately I've noticed that my
    > shortwave gets knocked out on 10 Khz when my laptop charger is plugged
    > in. I use the RCC but always double check the minutes with another non
    > RCC watch.
    I do not currently have a working VHF (see previous post), but have
    placed the RCC right up against Bluetooth, WiFi router etc. That can
    cause it to go well beyond the normal 3 minute/3 cycle reset but does
    not cause the time to jump, even during reset. I also placed it in a
    fireproof box next to a basement wall/floor for ten days and it did
    reset.  To look at CO it would have to view through the concrete wall,
    dirt between the attached garage floor, the concrete garage floor and a
    brick wall. Or it would have to look up through a sub floor, 3/4" oak
    floor, ceiling and roof.
    The only way I could stop it from receiving a signal and resetting was
    to repeat the above and nestle it between 25 pounds of lead, brass,
    copper and gunpowder in a surplus steel ammo box.
    As it receives signals at 60 kHz, NIST warns against harmonics from 60
    cycle appliances like refrigerators etc. Given the VHF frequencies, I
    don't know if those harmonics exist for VHF. (Not doubting it, just not
    a Ham, EE or physicist.) Thinking 5 watts up close and personal would
    likely pose a problem. How did your VHF tests go?
    As it auto resets at 2 AM EDT, I have been randomly attempting resets on
    command through the day and evening.  Approx. 90% successful, 70% day
    and 90% evenings.
    Attached are a NIST generic day/night coverage map, a 24 hour time vs
    signal map, and a more specific season/time/location signal-strength table.
    Bill B




    Browse Files

    Drop Files


    What is NavList?

    Join NavList

    (please, no nicknames or handles)
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.

    Email Settings

    Posting Code:

    Custom Index

    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site