Welcome to the NavList Message Boards.

NavList:

A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Message:αβγ
Message:abc
Add Images & Files
    or...
       
    Reply
    R: Re: Plath kriegsmarine sextant servicing
    From: Federico Rossi
    Date: 2007 May 19, 08:48 +0200

    Philip,
    if I haven't misunderstood, the washer is the cylindrical piece just under
    the picot screw, isn't it? There's a narrow gap between it and the pivot
    housing, do I have to pry it up (with a knife or so)?
    Federico
    
    -----Messaggio originale-----
    Da: NavList@fer3.com [mailto:NavList@fer3.com] Per conto di
    Philip Lange
    Inviato: venerd� 18 maggio 2007 16.01
    A: NavList@fer3.com
    Oggetto: [NavList 2899] Re: Plath kriegsmarine sextant servicing
    
    
    Federico,
    After you remove the washer you might reinsert the pivot screw  and turn it 
    all the way in until it either bottoms out or the head is flush with the 
    index arm pivot. There will be a small gap between the underside of the 
    head and the female part of the pivot assembly. Then apply a light tap to 
    the screw head. When the tapered pivot separates remove the screw and 
    remove the arm. Less chance for damage to the thread that way.
    
    Good luck. Fingers Crossed.
    Philip
    
    At 01:46 AM 5/18/2007, you wrote:
    
    >Thank you Philip,
    >I'm going to try to remove the alidade this evening, I'll let you know,
    >please cross your fingers......
    >Federico
    >
    >--
    
    
    
    
    --~--~---------~--~----~------------~-------~--~----~
    To post to this group, send email to NavList@fer3.com
    To unsubscribe, send email to NavList-unsubscribe@fer3.com
    -~----------~----~----~----~------~----~------~--~---
    

       
    Reply
    Browse Files

    Drop Files

    NavList

    What is NavList?

    Join NavList

    Name:
    (please, no nicknames or handles)
    Email:
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.
    Email:

    Email Settings

    Posting Code:

    Custom Index

    Subject:
    Author:
    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site