Welcome to the NavList Message Boards.


A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Add Images & Files
    Re: Manufacture new Bygraves?
    From: Brad Morris
    Date: 2009 Jul 9, 09:23 -0400

    Hi Bill
    I certainly can send you photos of my MHR-1.
    The locking mechanism is internal to the tubes and I believe to be a cam 
    mechanism, but have NOT opened up the tubes to see the inside.  In order to 
    replicate the device, we would have to take it to pieces and have a 
    Mechanical Engineer create a drawing package.  I do have on one staff who I 
    would trust to perform this work.
    My view is that since it was put together, I can probably take it apart and 
    put it back together.  This would naturally be a high risk activity, so I 
    want to be sure that we are going to proceed all the way to fruition.
    Best Regards
    -----Original Message-----
    From: NavList@fer3.com [mailto:NavList@fer3.com] On Behalf Of engineer@clear.net.nz
    Sent: Thursday, July 09, 2009 1:55 AM
    To: NavList@fer3.com
    Subject: [NavList 9039] Re: Manufacture new Bygraves?
    Brad and others
    There certainly seems to be some interest.
    What I had in mind was a small consortium to make a few replicas of the 
    Bygrave position line slide rule. Gary LaPook has shown that it is possible 
    to produce the scales, something that works like one and much more. I was 
    thinking of producing something that looks like an original Bygrave, made 
    from similar or same materials (with the possible exception of the scales). I 
    was not thinking of marketing and manufacturing for profit (much), but rather 
    at cost just for those members who wanted one.
    Do you think, Brad, you could send me some dimensioned sketches of your 
    genuine Bygrave, off list if you prefer, with notes about what you think the 
    materials might be? A close up picture of part of the scales would be useful 
    too, for those who want to think about making the scales with the same fonts. 
    I could then perhaps put together  a materials list and see what people could 
    do and where.
    Bill Morris
    New Zealand
    "Confidentiality and Privilege Notice
    The information transmitted by this electronic mail (and any attachments) is 
    being sent by or on behalf of Tactronics; it is intended for the exclusive 
    use of the addressee named above and may constitute information that is 
    privileged or confidential or otherwise legally exempt from disclosure. If 
    you are not the addressee or an employee or agent responsible for delivering 
    this message to same, you are not authorized to retain, read, copy or 
    disseminate this electronic mail (or any attachments) or any part thereof. If 
    you have received this electronic mail (and any attachments) in error, please 
    call us immediately and send written confirmation that same has been deleted 
    from your system. Thank you."
    NavList message boards: www.fer3.com/arc
    Or post by email to: NavList@fer3.com
    To unsubscribe, email NavList-unsubscribe@fer3.com

    Browse Files

    Drop Files


    What is NavList?

    Join NavList

    (please, no nicknames or handles)
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.

    Email Settings

    Posting Code:

    Custom Index

    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site