Welcome to the NavList Message Boards.


A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Add Images & Files
    Re: Lunars: A 90 Degree Miracle
    From: George Huxtable
    Date: 2004 Nov 1, 11:19 +0000

    Frank Reed wrote (and I'll quote it all)-
    >Some days a singularity is a useful thing...
    >In historical logbooks, lunars were frequently observed close to first or
    >last quarter or when the distance from a star was roughly 90 degrees. Why?
    >are some practical observational reasons that you can imagine for yourself.
    >But there's a "miracle" involved, too. In another post to the list, I recently
    >wrote that the required accuracy for the Moon's altitude is (with slight
    >approximation) given by:
    >  AccuracyMoon = 6' * tan(Distance) / cos(MoonAltitude)
    >(details in that other post).
    >OK... so what happens in this expression when the lunar distance is 90
    >degrees? The required accuracy is infinite. Which means that you can
    >tolerate HUGE
    >errors in the Moon's altitude when the distance is close to 90 degrees. You
    >could measure the Moon's altitude with a simple cross-staff, for example, and
    >have it wrong by 3 degrees, and there would be no problem. You could take
    >a wild
    >guess at the Moon's altitude, and it still wouldn't matter. As long as the
    >observed center-to-center distance is close to 90 degrees, the Moon's altitude
    >makes almost no difference at all. The altitude of the other body should still
    >be measured to six minutes of arc or better, quite a bit better if it's going
    >to be used for a matching time sight.
    >In addition to this convenience, lunars close to 90 degrees also have an
    >advantage in the clearing process. In series methods, it's only necessary to
    >calculate the two linear terms (see "Easy Lunars" on my web site). The
    >term is negligible when the distance is near 90. All told, lunar observations
    >for distances close to 90 degrees are significantly easier than those for other
    >distances, both shorter and greater.
    >By the way, the "series expansion" for clearing lunars is very helpful here
    >for seeing why the errors should depend on distance in this fashion and also
    >for deriving the expression above. Details upon request.
    >If you would like to experiment with this issue, you can go to my web site
    >and try the "Clear a Lunar" tool. Experiment with dates and objects until you
    >find one where the distance is just about 90 degrees (+/- a degree or two). On
    >the first pass, let the software calculate the objects' altitudes. If they're
    >negative, move your DR position until they're in the sky (not hard to estimate
    >from the GHAs and Decs). Then take the calculated altitudes and enter them as
    >if they had been observed (for the Moon you'll have to undo the semi-diameter
    >by hand until the tool says that you have no error in altitude. The clearing
    >results should be the same since you're feeding in altitudes that are the same
    >as the previously calculated altitudes. Now the fun starts... Try entering a
    >different altitude for the Moon. You'll soon see that the altitude can be way
    >off before there is any serious impact on the cleared distance. Think it's a
    >fluke? Pick another DR. Move the objects around in the sky as much as you like
    >(but keeping them above the thick air and high refraction below 10 degrees). As
    >long as the distance is close to 90 degrees, the accuracy of the Moon's
    >altitude is not a critical factor in clearing a lunar.
    >I think I've got that all right... More later.
    Response from George.
    I'm doubtful whether Frank has got that all right.
    Take a simple case. The Moon is at an altitude of 45 degrees on one side of
    the sky. The other body is at 45 degrees on the other side od the sky, so
    that their azimuths differ by 190 deg.
    The lunar distance, in that case, is 90 deg. Does Frank claim that in such
    a geometry, errors in the Moon's altitude correction, resulting from errors
    in its altitude, would have no effect?
    I don't dispute that there are some geometries in which, with lunar
    distance of 90 deg, errors in Moon altitude have no effect.
    I suggest there's some rethinking called for, about the expression for
    accuracy required, at the top of his posting.
    contact George Huxtable by email at george---.u-net.com, by phone at
    01865 820222 (from outside UK, +44 1865 820222), or by mail at 1 Sandy
    Lane, Southmoor, Abingdon, Oxon OX13 5HX, UK.

    Browse Files

    Drop Files


    What is NavList?

    Join NavList

    (please, no nicknames or handles)
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.

    Email Settings

    Posting Code:

    Custom Index

    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site