Welcome to the NavList Message Boards.

NavList:

A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Message:αβγ
Message:abc
Add Images & Files
    or...
       
    Reply
    Re: Double vial horizon prototype
    From: Wolfgang Hasper
    Date: 2012 Jan 11, 11:00 +0100
    Randy,
    have a look at my earlier posting with photos of my home brewed Freiberger type mirror AH.
    I used three hardened steel balls (from a ball bearing) glued into undersize holes in the base plate togive a defined three point seat for the mirror near to its rim (I used a circular mirror)
    The mirror is held in place by means of three springs, bearing on the mirror surface by a small steel ball directly above the larger ball underneath.
    This is pretty much the principle used in sextants and other optical instruments and was easy to make, too.
    Regards
    Wolfgang



    Von: "Bill Morris" <engineer@clear.net.nz>
    Gesendet: 11.01.2012 00:12:25
    An: NavList@fer3.com
    Betreff: [NavList] Re: Double vial horizon prototype

    Randy,

    I don't think it would be wise to glue the mirror to the levelling plate. As the glue cures, the mirror may take on the contour of the plate. A simple way of retaining the mirror would be to use three pan-head screws, tapped into the plate just outside the periphery of the mirror, and tightened so the heads are just short of touching the mirror. This will prevent you carelessly decanting the mirror on to the floor, but will not introduce any strains into the glass.

    Grinding two plates together may well give you a surface that is smooth, but it is very unlikely to be flat to the standard required. A 10 second level with feet 100 mm apart will comfortably detect a difference in level of .005 mm over this distance. If you grind two circular plates together, more likely than not one will be concave and the other convex to match. This is quite desirable when mounting drums of marble on top of each other, but not when you want a truly flat surface. I am inclined to doubt, however, that the technology of the times of the Parthenon, was able to produce steel plates of the required size or even at all.

    I suggest you have a friend face the plate in his lathe. A properly adjusted lathe will face very slightly concave, so the mirror will be well supported at its periphery, which is where the feet of your level will rest when setting level. I don't think it's a good idea to divorce the level from the surface that you wish to level, and suggest you stick to resting the level on the mirror face.

    Bill Morris
    Pukenui
    New Zealand


    ----------------------------------------------------------------
    NavList message boards and member settings: www.fer3.com/NavList
    Members may optionally receive posts by email.
    To cancel email delivery, send a message to NoMail[at]fer3.com
    ----------------------------------------------------------------

      

    SMS schreiben mit WEB.DE FreeMail - einfach, schnell und   
    kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192
       
    Reply
    Browse Files

    Drop Files

    NavList

    What is NavList?

    Join NavList

    Name:
    (please, no nicknames or handles)
    Email:
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.
    Email:

    Email Settings

    Posting Code:

    Custom Index

    Subject:
    Author:
    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site