NavList:

   

Reply

Ok I will correct this. I forgot myself also. So we might be in the range of 4.5 metres now...

Wolfgang

-----Urspr�ngliche Nachricht-----
Von: "Brad Morris" 
Gesendet: 19.01.10 22:32:01
An: "NavList@fer3.com" 
Betreff: [NavList] Re: Cylindrical Slide Rule tube poll

Hi Wolfgang

You may have missed me.  When I told Gary I wanted one, I meant it!  Of 
course, you may have confused me with Bill Morris, a common occurrence.

I would want one and I do believe Dr. Sult would requested TWO (2), in 
addition to the construction guide.

Best Regards
BRAD Morris
*emphasis added for clarity, I am not yelling :-)  really!!!

-----Original Message-----
From: navlist-bounce@fer3.com [mailto:navlist-bounce@fer3.com] On Behalf Of Wolfgang Hasper
Sent: Tuesday, January 19, 2010 3:37 PM
To: NavList@fer3.com
Subject: [NavList] Re: Cylindrical Slide Rule tube poll

As of now we are at a total length of 3 metres.

Bill    Morris
Paul    Brewer
Derrick Young
Thomas A.       Sult
Hanno   Ix
Wayne   Lowry
Douglas         Denny

were interested.
I keep the list open so we have an idea of what
quantities we are looking for...

I did not receive a quote yet.

Wolfgang





Am Montag, 18. Januar 2010 20:03 schrieb Wolfgang
Hasper:
> Since we come back to the tubes time after time
> I am interested to find out how many would like to
> make an actual reproduction on reproduced tubes?
>
> The HR1 uses Aluminium tubes
>
> (all dimensions [mm])
>
> inner tube    54x1            235 long
> interm. tube  58x1            225 long
> outer tube    62x1            222 long
>
> A kit of all three sizes 300 long each would be
> nice. Narrow tolerances are required for the outer
> diameters to fit the scales, the inner diameter is
> less important. If there is a felt lining as on the
> original you can easily compensate for 0.2 mm.
>
> Aluminium as the material seems preferable but not
> compulsory. I would not like to have stainless
> steel, it is heavy and a pain to machine.
>
> To investigate the local possibilities for custom
> tubes I have started with a firm that works with
> perspex. Maybe plastic is more realistic to have in
> custom dimension than aluminium? We'll see.
> I will try on aluminium tubes also.
>
> If Douglas is successful earlier it will be even
> better, maybe we can get two independent quotes.
>
> How many on the list would be interested in how many
> kits?
> If you want I could compile a list of all interested
> so we know how many metres we will have to order ;o)
>
> Wolfgang




"Confidentiality and Privilege Notice
The information transmitted by this electronic mail (and any attachments) is 
being sent by or on behalf of Tactronics; it is intended for the exclusive 
use of the addressee named above and may constitute information that is 
privileged or confidential or otherwise legally exempt from disclosure. If 
you are not the addressee or an employee or agent responsible for delivering 
this message to same, you are not authorized to retain, read, copy or 
disseminate this electronic mail (or any attachments) or any part thereof. If 
you have received this electronic mail (and any attachments) in error, please 
call us immediately and send written confirmation that same has been deleted 
from your system. Thank you."






____________________________________________________________________
WEB.DE MillionenKlick: Kostenlos tippen, t�glich 1 Million gewinnen!
http://produkte.web.de/go/07/

   

Reply