NavList:
A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding
From: Gary LaPook
Date: 2008 Aug 18, 14:21 -0700
HEX A7. http://www.asciitable.com/
http://www.jimprice.com/jim-asc.shtml
From the second link:
Q: What are the ASCII codes
for things like the
degrees symbol (°), the trademark symbol, solid blocks and other
special symbols?
A: The answer is "it depends". There's really not an ASCII
character for most of the special characters (other than those shown in
the table at
the top of this page.
However, there are different extended ASCII sets that include
a lot more special characters. (See IBM PC
Extended ASCII, below.) Also, for information about including
special symbols on a web page, you might look at some of
the other
charts and references,
below.
Q: How do I generate
extended ASCII characters from the keyboard?
A: DOS will allow you to enter extended ASCII characters into
many programs. Here's how you do it:
- Make sure NumLock is enabled on your keyboard.
- Press and hold the ALT key.
- While holding down the ALT key, enter the 3-digit decimal code for the extended ASCII character you want to generate.
- Release the ALT key.
Q: Does this work in
Windows?
A: A better way to enter special symbols in Windows
applications
(such as Word), is to take advantage of the symbols
in the fonts provided by Windows. For example, in Word,
use the following steps:
- Click on "Insert" (in the menu at the top of the page)
- From the drop-down menu, select "Symbol". A chart of special symbols will appear
- From the chart, you can select a symbol to insert into your document by highlighting the symbol, and clicking on the word "Insert" at the bottom of the chart.
gl
George Huxtable wrote:
GregR asked- I'm wondering if everyone on the list can see the special character for the degree symbol on their end - if so, I think that would be a lot easier to use than the various workarounds (this format - i.e. 180deg 00' - seems to be the favorite flavor du jour). ================ Yes, I have no problem in reading that degree symbol, or those, created in different ways, by others. But of course the interest should be in responses from anyone who CAN'T read that symbol properly, and I strongly request that, if that applies to any list member, he should say so promptly. If there are no such responses, I will happily switch away from using "deg" to using "º". (did that come across as a degree symbol?). It may have been me that was resonsible for starting the trend to using "deg", from my experience of difficulties with a very elderly Mac (1992 vintage), which has since been supplanted by a more modern PC laptop. However, my attempts at using the "character map" haven''t been simple. No problem in finding the character, or copying it, but when pasted into Outlook Express it's always in a larger font, which then sticks to all subsequent typing. I can't see how to adjust the font size created by Character Map, or that being put together in Outlook Express. Can anyone kindly assist here? The simplest method seems to be that proposed by Gary, who wrote- "To make the degree symbol hold down the ALT key while typing 167 on the numeric keypad (not the top row of numbers.) If you do not have a separate numeric keypad engage NUMLOCK and use the keys on the keyboard that substitute for a numeric keybard (on my Fusitsu laptop I engage NUMLOCK then do ALT JO7.)" My cheapo Dell laptop (probably many members use something similar) doesn't have a separate keypad, but does have a key marked "Num Lk", which when pressed turns on or off a green light. But that seems to be all it does. With that light lit, pressing "j " doesn't create the numeral "1" as I would expect, but the usual j. And so, unsurprisingly, Gary's method won't work for me. Can anyone guess what's wrong? Is it a fault, or perhaps more likely, is there some hidden software control that's disabling it? Or am I misunderstanding? George. contact George Huxtable at george@huxtable.u-net.com or at +44 1865 820222 (from UK, 01865 820222) or at 1 Sandy Lane, Southmoor, Abingdon, Oxon OX13 5HX, UK.
--~--~---------~--~----~------------~-------~--~----~
Navigation List archive: www.fer3.com/arc
To post, email NavList@fer3.com
To , email NavList-@fer3.com
-~----------~----~----~----~------~----~------~--~---