Welcome to the NavList Message Boards.

NavList:

A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Message:αβγ
Message:abc
Add Images & Files
    or...
       
    Reply
    Re: Borrowed Bygrave
    From: Tom Sult
    Date: 2016 Jan 17, 15:21 -0600
    Wolfgang 

    If you have many set I would like to take you up on this as well. What would be the additional cost of shipping to the US. 

    Tom Sult, MD
    Author: JUST BE WELL

    On Jan 17, 2016, at 14:27, Wolfgang Hasper <NoReply_Hasper@fer3.com> wrote:

    Dear Francis,
    I have many sets of tubes left. If you want some please transfer 40 EUR via Paypal to slideruletubes[at]web.de  (insert
     {at}-character) per set.
    There are three tubes (inner and intermediate to carry the scales plus the outer cursor tube of the MHR1. Additionally a short bit of thicker tube for the handle)
     
    The material is laminated paper as it is used for inductivities or pcbs. It is waterproof and quite tough, lightweigt and easy to work with.
     
    As re the code every information has already been given by the expert :o)
     
    My results are fully satisfactory, thus far all within one minute of calculator. But I have not done a comprehensive study, others have and I trust their results.
    BTW editing the code may mean replacing a diameter figure's decinmals with the measurement done on your tubes...
     
    LAst but not least: 3 in drainpipe makes a nice tube to store the rule in.
     
    See earlier posts as re the precise dimensions of tubes, technical drawings with a suggestion or an easy to make locking meachanism and some practical experience.
    Dont hesitate to contact me for further discussion :o)
     
    Best regards
    Wolfgang
     
     
    Gesendet: Sonntag, 17. Januar 2016 um 07:17 Uhr
    Von: "Francis Upchurch" <NoReply_Upchurch@fer3.com>
    An: wolfgang.hasper{at}web.de
    Betreff: [NavList] Re: Borrowed Bygrave

    Hi Wolfgang,

    I am ashamed to say, I was not aware of your MHRI masterpiece, which of course I now have to build! Your custom built tubes look better than my drain pipe off-cuts, especially the outer curser tube, which in my Bygrave and minifuller I had to make by hand.

    I would be very interested in obtaining some tubes for a new build project and likewise any details of the postscript scales. Please let me know costs and availability. Also, any advice on Post script editing? I have never been able to persuade my computer to take PS edit software.

    What sort of results are you getting with your MHRI?

    Best wishes.

    Francis

     

    From: NavList@fer3.com [mailto:NavList@fer3.com] On Behalf Of Wolfgang Hasper
    Sent: 16 January 2016 19:57
    To: francisupchurch---.com
    Subject: [NavList] Re: Borrowed Bygrave

     

    ... and, by the way, there are still plenty custom tubes for concentric slide rules in stock...

     

    contact me in case you want some.

     

    Dimensions are matching those of the MHR1 but the "true" Bygrave is almost identical.

    And the brilliant postscript code available  to generate the scales will take any diameter and either "Bygrave" or "HR" mode.

     

    Regards

    Wolfgang

     

     

    Gesendet: Samstag, 16. Januar 2016 um 12:37 Uhr
    Von: "Gary LaPook" <NoReply_LaPook@fer3.com>
    An: wolfgang.hasper{at}web.de
    Betreff: [NavList] Re: Borrowed Bygrave

    Obviously, I'm pretty proud of my creation, the Flat Bygrave. I would suggest hat if you are thinking of building a cylindrical model that you make a flat one first because it is so f***ing easy. If you already have the clear printer sheets then it will take you less than 5 minutes to download the two scales from my website and print them out on your printer and you will have a working Bygrave. Take it for a test drive.

     

    The cylindrical one is easier to use and feels better in your hand and has a historical connection but the flat one will give you a quick introduction to this delightful device that is just as accurate.

    Then, I suggest you make a simple tubular one using the method that I have posted in the past. And THEN, if you really like it, you can make a historically accurate one like those other guys have done, things of beauty. but requiring much more labor.

     

    gl

     


     


    From: David Pike <NoReply_DavidPike@fer3.com>
    To: garylapook---.net
    Sent: Thursday, January 14, 2016 5:17 PM
    Subject: [NavList] Borrowed Bygrave

     

    I’ve got the loan of a Bygrave Position Slide Rule MkIIA from the Royal Institute of Navigation for a couple of months (photos below).  Apparently, they had two, a good one and a poor one.  Unfortunately, I was only able to find the poor one; nobody seemed to know what happened to the good one.  It carries the inscription that it was produced by the Air Ministry Laboratory South Kensington in August 1920.  If the number was ever filled in, it’s long since rubbed off.  I’d like to teach myself to use it prior to possibly making a copy for myself with plastic piping.  Is the best set of usage instructions those on Gary’s Freddie Noonan page?  Also, does anyone know where I can find a photo or print out of the explanation off the side of the MkIIA?  Finally, does anybody know what went down the inside of the cylinders?  All I can see is the remains of a brass chain.  DaveP



    Attached File:

    (AML-Slide-Rule-1-Medium.JPG: Open and save)

    Attached File:

    (AML-Slide-Rule-2-Medium.JPG: Open and save)

    Attached File:

    (AML-Slide-Rule-3-Medium.JPG: Open and save)

    Attached File:

    (AML-Slide-Rule-4-Medium.JPG: Open and save)

    Attached File:

    (AML-Slide-Rule-5-Medium.JPG: Open and save)
     


     

    View and reply to this message

    View and reply to this message

    View and reply to this message

    View and reply to this message

       
    Reply
    Browse Files

    Drop Files

    NavList

    What is NavList?

    Join NavList

    Name:
    (please, no nicknames or handles)
    Email:
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.
    Email:

    Email Settings

    Posting Code:

    Custom Index

    Subject:
    Author:
    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site