Welcome to the NavList Message Boards.

NavList:

A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Message:αβγ
Message:abc
Add Images & Files
    or...
       
    Reply
    A-12 sextant question
    From: James R. Van Zandt
    Date: 2006 Oct 15, 16:40 -0400

    
    As I have mentioned, I have recently bought an A-12 bubble sextant.  I
    have since refilled the bubble chamber with xylene and made a sun
    shot.
    
    However, I have a question: The sextant came with three plastic drums
    to record measurements.  How do I take off a drum?
    
    According to the user manual, it should be simple:
    
      "Lift the drum straight off the Sextant.  It will be noted that the
      drum is fitted to a flange which has three studs.  Two of these studs
      are small and long enough to extend through the operating drum.  The
      remaining stud is shorter and larger so that it is impossible to put
      the drum on in the wrong position"
    
    However, I think my sextant has been assembled incorrectly.  I've
    posted a picture here: http://jrv.oddones.org/A-12-drum.jpg.  In
    addition to studs mentioned above, the drum has a slot and the shaft
    has a key.  However, on my sextant, the key and slot are almost 180
    degrees out of alignment.  The drum cannot be pulled directly out
    because of the key, and cannot be rotated because of the studs.
    
    I can see two possible ways to proceed.  The studs have slots,
    suggesting I might remove them with a screwdriver.  I actually tried
    that, but they didn't budge.  The other way would be to remove the
    "spring lock" from the other end of the shaft.  I'm not sure that
    would accomplish anything - the manual tells me to remove the spring
    lock only after I "remove the three screws from the countershaft and
    trigger bracket assembly".  However, the drum is covering those three
    screws.
    
    Any suggestions would be appreciated.
    
            - Jim Van Zandt
    
    --~--~---------~--~----~------------~-------~--~----~
    To post to this group, send email to NavList@fer3.com
    To unsubscribe, send email to NavList-unsubscribe@fer3.com
    -~----------~----~----~----~------~----~------~--~---
    
    

       
    Reply
    Browse Files

    Drop Files

    NavList

    What is NavList?

    Join NavList

    Name:
    (please, no nicknames or handles)
    Email:
    Do you want to receive all group messages by email?
    Yes No

    You can also join by posting. Your first on-topic post automatically makes you a member.

    Posting Code

    Enter the email address associated with your NavList messages. Your posting code will be emailed to you immediately.
    Email:

    Email Settings

    Posting Code:

    Custom Index

    Subject:
    Author:
    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site